EXPORT BUSINESS DEVELOPMENT
  • Home
  • Products
  • Parts
  • Services
  • Downloads
  • Contact

FARMALL CVT

​The compact Farmall® C CVT series tractors are designed for comfortable, easy operation; combining a deluxe operator environment with a smooth operating CVT transmisision.
The compact Farmall C CVT is easy to operate — no shifting required. A simplified control pod guides the CVT transmission. Intuitive, easy to understand buttons on the pod allow you decide how your tractor operates:
  • Response: Choose how quickly or slowly your tractor responds to input.
  • Speed: Select Hi for 100 percent maximum speed or Low for 50 percent maximum speed.
  • 2WD / 4WD: Set your traction for two- or four-wheel drive. This setting is electronically controlled and can be engaged on the go.
  • Cruise control: Just like a car, use the left button to turn on or off and the right button to set or resume.
    ​
The latest fuel-injection technology offers several advantages, including faster throttle response, improved power performance, increased efficiency and cleaner emissions. The system precisely meters fuel as power demands for fast recovery to load, along with quieter engine operation with less vibration.
Picture

MODELS

Picture
CVT 45
Picture
CVT 55

ENGINE

Manufacturer:                        CASE IH FPT
Model:                                     R7531E4
Cylinders:                               3
Displacement, cu in (L):        136 (2.23)
Engine Bore, in (mm):           3.70 (94)
Rated Engine Speed, rpm:    2600
Fuel Tank capacity, gal (L):   13 (49.2)

TRANSMISSION 

Manufacturer's Description:            Continuously Variable Transmission
Transmission Type:                   Chain Variator Drive
Number of Forward / Reverse Speeds: Infinite
Maximum Speed Forward, mph (kph): 18.6 (29.9)
Shuttle (Forward-Reverse):       Standard
Picture

POWER TAKE OFF

Mid-mount PTO: To power mid- and front-mount equipment, such as mowers and snow blowers, a factory-installed mid-mount PTO comes standard. 

Speed Options: A rear, independent 540-RPM PTO with electro-hydraulic engagement is standard and drives all your 3-point-mount and pull-behind implements. The mid-mount PTO operates at 2,000 RPM.

HYDRAULIC SYSTEM

Hydraulic System Type: Open Center
Main Hydraulic Pump Type: Dual gear
Implement Pump Flow, gpm (Lpm): 9.7 (36.9)
Optional Pump Flow, gpm (Lpm): No option
Number of Standard Remote Valves: 1 or 2 optional
3-Point Hitch Category: Category 1
Draft Sensing or Lift Control: Position control
Standard Lift Capacity 24 Inches behind pin, lb (kg): 2,800 (1270)
Standard Lift Capacity at lift pin, lb (kg): 3,541 (1606)

FRONT & REAR AXLE

  • Suspended Front Axle Available: No
  • Final Drive Location and Description: np
  • Axle Output End, Flange or Bar: Flange
  • Axle Bar Diameter, in (mm): No bar axle

TIRES & DIMENSIONS

Height to Top of Cab, in (mm): 92.7 (2355)
Height to Top of ROPS raised, in (mm): 97.4 (2473)
Overall Width, with standard wheels or tracks, in (mm): 68.3 (1735)

​
Weight, MFD/4WD w/ROPS, lb (kg): 4,190 (1900)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg): 4,940 (2240)
Front Tire Size orTrack Width, MFD/4WD or Track: 10-16.5, 6PR R4
Rear Tire Size or Track Width: 17.5Lx24, 6PR R4

​
Picture
Back
Proudly powered by Weebly
  • Home
  • Products
  • Parts
  • Services
  • Downloads
  • Contact